Monodeck & Econocheck Flexible Foams
Monodeck and the higher density Econocheck rebond technical foam, is a moulded polyurethane product made from pieces of shredded flexible polyurethane foam, bonded together with a binder. For decades its excellent resilience has made it suitable for applications including vibration sound dampening and flooring.
Bonded foam properties can vary over a wide range of selected base material, particle size, compression ratio, type and quantity of the binder to create the optimum dynamic stiffness for a specific application. As a consequence, rebond flexible foam such as used in the monodeck range has gained acceptance in traditional acoustic applications through out the construction industry.
The monodeck 17T system is designed to reduce transmission through timber floors in situations where finished floor height is not critical.
The Monodeck 26T system is designed to reduce transmission through timber floors in situations where finished floor height is less critical and a highly cost-effective solution is required.
The Monodeck 30T system is designed to reduce transmission through timber floors in situations where maximum airborne noise reduction is essential.
The Monodeck 37T system is designed to replace floorboards and reduce sound transmission.
The Monodeck 26C system is designed to reduce sound transmission and also reduce impact sound transmission through concrete floors.
The Econocheck Deep Batten 75RD system is designed to reduce sound transmission through timber floors within a timber frame structure.
The Econocheck Shallow Batten system is designed to reduce sound transmission through a level concrete structural sub-floor.
The Econocheck Underscreed XL5 system is designed to be placed within a masonry structural floor directly below the screed.
he Econocheck Underscreed XL8 system is designed to be placed within a masonry structural floor directly below the screed where maximum acoustic performance is essential.
Essential accessory product with all Monodeck, Isocheck & Econocheck Batten systems.
A concealed suspension section (metal channel) which serves to enhance the acoustic properties of a separating floor or wall when used in conjunction with other acoustic systems.
For use with all Monodeck & Isocheck tongue & groove board joints. Also, deck joints with Econocheck Acoustic Batten systems
Many uses for isolation, including on top of joists, under partitions, etc. Self-adhesive, with high load capability.
For use when forming anti-flanking upstands with Econocheck XL under-screed systems.
For use when jointing Econocheck XL under-screed systems.
Designed for isolated support of proprietary metal-framed ceiling systems.