The WPL Diamond range offers sewage treatment plants for properties that are not connected to mains drainage.  The DMS range includes a range of sizes suitable for 1-20 people.

Why Diamond?

There are several key reasons to choose a Diamond wastewater solution for your development:

• Minimal maintenance, low running cost - unlike other sewage treatment plants on the market, the Diamond’s unique design has no internal moving parts.  This means that it requires minimal annual maintenance, making it economical to run.
• Kind to the environment – the Diamond’s treatment process requires no chemicals, so it’s kind to the environment.
• Minimal visual impact – the Diamond’s tank is buried entirely underground, so it has minimal visual impact.
• No smells – most other treatment plants have primary tanks which store settled solids and can emit odours.  The Diamond has no primary tank and is therefore odour-free.
• Long emptying cycle – the Diamond’s continuous bacterial digestion treats wastewater to a standard that meets all normal Environment Agency consents.  This treatment process can achieve a de-sludge (emptying) period of up to three years – much longer than that of most other plants.
   

Process Performance Guaranteed

The Diamond treats wastewater to a 95 percentile standard of:

• 20mg/l Biological Oxygen Demand (BOD)
• 30mg/l Suspended Solids (SS)
• 20mg/l Ammoniacal Nitrogen (AMM-N)

If more stringent environmental requirements are specified, please contact WPL on 02392 242 600
 

How does the Diamond treatment plant work?

• Wastewater enters the Diamond via the inlet pipe directly into the central aeration chamber (1)
• The central aeration chamber (1) empties into the bottom of the outer clarifier chamber (2).
• A drop pipe (7) releases air through a disc plate diffuser (4).
• An upward flow of process fluid draws settled solids (5) through the draft tube (3) to discharge at the surface of the aeration chamber.
• The design of the draft tube (3) ensures complete mixing of oxygen with the sewage. Oxygenation allows aerobic organisms, that biologically degrade wastewater contaminants, to grow.
• Gravity causes aerated solids to settle at the tank bottom (5) where they are drawn back up through the draft tube (3).
• Raw sewage displaces biological solids (8)from the aeration chamber (1) to the clarifier chamber (2). Quiescent conditions in the clarifier allow digested solids to settle at the base (5) and  return to the aeration chamber (1).
• The clarified effluent flows up through the scum baffle (9) and over the weir arrangement (6) prior to discharge via the outlet pipe.
   

How is the Diamond treatment plant installed?

The Diamond sits below ground and is straightforward to install – often without the need for concrete backfill, subject to ground conditions.  A comprehensive installation manual is supplied with each plant, which you should read thoroughly prior to specification and installation. This can be downloaded by clicking here. We recommend that you use an experienced and qualified installer – for details of those in your area, please contact a member of the WPL sales team.

 

The plant is supplied with an air blower, together with an alarm and an enclosure to protect it from the weather.  This comes with 10 metres of airline to connect the blower to the tank.  The Diamond can accommodate longer airlines – up to 30 metres.  Please contact us for more information.
 

The Diamond Standard

The WPL Diamond range meets the following industry standards:

• CE marked, fully type tested and certificated in accordance with the mandatory European standard BS EN12566-3, and meets all current legislation under the Environmental Permitting Programme
• Fully compliant with UK Building Regulations and Environment Agency recommendations
• The Diamond is designed using the British Water Code of Practice Flows and Loads, to ensure correct sized tanks
• LABC approved, which means it has been assessed against Building Regulation requirements and can be installed without the need to have it signed off again by building control
• The Diamond DMS range has DIBt approval in Germany - approval number Z-55.31-426
• The Diamond has French Ministry approval - approval number 2012-039                                                    

Diamond PIA Certificate     Diamond CE Mark Certificate      Diamond DOP

Additional extras

• Sample chamber - a compact chamber designed to allow easy sampling of treated wastewater (final effluent) may be required by the Environment Agency or regulatory authority.
• Invert extensions - the Diamond range offers one of the widest choices for invert extensions, giving complete flexibility for different site conditions and installation requirements.
• Integral pump chamber (IPC) - this has the features of the Diamond plant but with an IPC, designed to pump final effluent to a water course, ditch or soakaway. It can deliver up to 80 litres per minute of effluent at a head of 4m.
• Primary Treatment Chamber (PTC) - A small, underground treatment chamber installed to protect the Diamond from gross solids. This is mandatory for plants installed in Germany and France. Not required in the UK. For requirements in other countries, please contact your local authority, distributor or WPL for further information.

Where to use the Diamond DMS range

• Single houses
• Small groups of houses
• Small commercial premises
• Replacing existing septic tanks
   

Dimensions and technical specifications

For further product information and technical specification please download the WPL Diamond brochure