FEEDBACK
Competitive prices. Excellent Service with prompt delivery. I would recommend IQ to others and will certainly use again.
Mr K
Excellent, professional, efficient service from IQ Builders Merchant. Needed to purchase 3000 bricks to finish a new build project, Oliver was great in sourcing the same bricks, at a very good price, had them delivered in a matter of a few days. Happy to use again and to recommend.
Mr G
Ordered the STUNNING XL Joinery PreFinished Walnut Portici Door . Very pleased with the service 10/10
Mrs W

ElectroFusion Reducing Coupler 50x40mm

ElectroFusion Reducing Coupler 50x40mm
Plasson is the complete MDPE Solution.
Product Code: 10139
£19.44 (Exc Vat)
£23.33 (Inc Vat)
- +
  • Description
  • Delivery
  • Price Match Request
ELECTROFUSION

Plasson Electrofusion fittings are designed for high performance pipe jointing and a long system life. The combination of quality , durability and ease of use has been shown to be most economincal for both installer and network owner.

Features
- Standard 4.7mm pin size fits UK controllers.
- PLasson fittings will weld to PE80, PE100 and PEX-A pipes.
- Fittings available to weld to thin walled pipes up to SDR41.
- Long fusion zones provide high strength joints.
- Large cold zones ensure quality welds.
- Suitable for use with Plasson SmartFuse, Fusamatic and non Fusamatic controllers.
- Barcode and Plasson SmartFuse automation reduces potential for errors in set up.
- Profiled fitting body to spread stresses and extend long service life.
- Range includes unique products to simplify the task.
- Single weld time for ambient temperature range from -10 to +40 degrees centigrade, no time adjustment required.
- PE coated welding wire ensures consistency of material in the joint to strengthen the weld.
- Welding wire is precision laid in the fitting to provide even heat distribution.
- Larger fittings have protected pins to minimise the possibility of damage during handling.
- Saddle fittings have an under part - no top loading tool is required to fit them.
- Tees and elbows to 250mm are available, reducing time and installation costs.
- WRAS approved material.
- Fittings BS EN 1201 and BS EN 1555 approved.
Here at IQ Builders Merchant we offer such a wide variety of products in all manner of shapes, sizes and weights. Each of our ranges has a particular delivery process to ensure the safe delivery of each item. Below we have listed a selection of our best selling ranges and the delivery time for these ranges;
  • Brick Reinforcement - 1-2 Days
  • Building Materials - 1-2 Days
  • Deanta Doors - 2-3 Days
  • JB Kind Doors - 5-7 Days
  • XL Joinery Doors - 5 Days
  • LDP Doors - 3-5 Days
  • Jeldwen Doors - 3-5 Days
  • Timber Windows - 4-5 Weeks
  • Roof Windows - 1-2 Days
  • Tools 1-2 Days
  • Drainage 2-3 Days
  • Velux Roof Windows usually 1-3 Days
All deliveries are subject to stock and we will be sure to give you as much notice as possible for any stock issues that may affect your delivery.

To keep things simple we have 3 delivery services/costs.
  • Free Delivery – Orders over £250.00 INC VAT
  • Standard Delivery £10 – Usually courier delivery.
  • Big & Bulky Delivery £35 – Items that require special attention for delivery, usually doors/bricks/blocks and most items that require delivery on a pallet.
Additional Delivery charges apply for the following postcodes: PA, DD, PH, KW, KV, AB, IV, HS 

A preferred delivery date can be entered when ordering, however this is not guaranteed. 

Deliveries are made between 7.00am – 5.30pm Monday - Friday although we will give you as much notice as possible for early/late deliveries.

In all cases we are able to arrange Saturday deliveries although this is a chargeable service.

Delivery will only be arranged to destinations within mainland UK. Please supply the full delivery address at the time of order this may differ from the billing address so long as the billing address matches the card holder’s address.

Delivery will occur when the Goods are ready for unloading at the delivery address specified at time of order or as subsequently agreed by both the buyer and IQ Builders Merchant.

Any dates specified by IQ Builders Merchant for delivery of the Goods are intended to be an estimate and time for delivery shall not be made of the essence by notice. If no dates are so specified, delivery shall be within a reasonable time.

Subject to the other provisions of these conditions, IQ Builders Merchant shall not be liable for any direct, indirect or consequential loss (all three of which terms include, without limitation, pure economic loss, loss of profits, loss of business, depletion of goodwill and similar loss), costs, damages, charges or expenses caused directly or indirectly by any delay in the delivery of the Goods.

IQ Builders Merchant shall arrange for delivery to site on the understanding that there is a suitable road to the delivery address requested. If no such road exists delivery will be made to the nearest point to which, in the opinion of the driver, the vehicle may safely proceed and unload. Except for the use of a vehicle mounted crane, the Buyer will provide all necessary labour and equipment required to unload the Goods promptly.

A signature on the delivery note constitutes that all materials have been received in good order.  It is the responsibility of the buyer to ensure that all goods have been checked and any damages noted to the delivery driver at the time of delivery.

Delivery of all Heavyside/Big & Bulky/Pallet items are made kerbside.

All deliveries of palletised products (Brick/Block/Paving/Specified at time of order) will be delivered using a pallet truck. A Crane offload delivery service is available also at an extra cost.

Parcel deliveries will only be made once to the specified delivery address, any required re-delivery may be chargeable.

It is the responsibility of the buyer to be home/on site on the day of delivery agreed by both the buyer and IQ Builders Merchant.
  • Price Match Request

    Please supply the following information. Terms & Conditions Apply (Stated below this form)
  • Browse Files
  • Should be Empty: