Underfloor Heating
The LowBoard panel enables underfloor heating to be installed where there is minimal height available to build up the floor. The total height of the panel is just 15mm.
The LowBoard panel is a high density wood board with grooves routed to accept the 12mm pipe. The panel has an aluminium layer bonded to the underside that acts to spread the heat through the board and into the floor. The panels are laid as a floating floor over the existing construction with a ply layer or the floor finish laid over to complete the floor.
LowBoard is also available in 22mm thick panels for 16mm pipe. LowBoard 22 is used for larger areas where longer pipe runs are required.
You'll find below a list of the products we anticipate you will need for the project including any allowance for waste, if you feel you require less or more product for the project please let us know and we will be happy to re-quote.
Timoleon has developed a range of underfloor heating products that are not only simple to install and easy to use but have excellent heat outputs and work well with renewable technologies such as heat pumps and solar thermal. This next generation of underfloor heating products are specifically designed to integrate easily into UK constructions.
15no LowBoard15 for Low Build-Up Floors (1.2m x 0.6m)
100m 12mm Pipe
1no 2 Port Branch Manifold With Auto Air Vents & Flow Meters
1no Pump Mixing Pack With 'A' Rated Pump & Isolating Valves
4no Pipe Bends Floor to Banifold
4no 12mm Pipe Conncetors
2no Blanking Plugs
2no 230V Actuator - 2 Wire
1no Timoleon Programmable Thermostat with Floor Sensor
1no Wiring Centre - 230V Actuator Output
Installation Guide
Customer reviews
-
DeliveryTime:Special Order TBC
-
Brand:Omnie