ToronFloor panels are manufactured from flooring grade chipboard or plywood. The pre-machined panels are routed with a unique pattern to accept 12mm pipe. The design of the panel makes it suitable as a structural floor deck.
The panels are laid and fixed onto the joists in the same way as a normal chipboard floor. The pipe is installed into the grooves with the ends of the circuit dropping into the joist space to then continue to the manifold. Once the foil diffuser is fitted a standard overboard layer, such as 6mm ply, is fully glued on top to complete the floor.
As the pipe is embedded within the surface of the floor deck there is an excellent transfer of heat. This provides a high output even at low water temperatures making the system ideal for use with heat pumps and other renewable energy sources.
The ToronFloor heating system has been independently tested at TRADA for structural performance.
You'll find below a list of the products we anticipate you will need for the project including any allowance for waste, if you feel you require less or more product for the project please let us know and we will be happy to re-quote.
Timoleon has developed a range of underfloor heating products that are not only simple to install and easy to use but have excellent heat outputs and work well with renewable technologies such as heat pumps and solar thermal. This next generation of underfloor heating products are specifically designed to integrate easily into UK constructions.
8no 22mm ToronFloor Chipboard Panel
2no Foil Tape Diffuser for ToronFLoor System (46m)
30m 16mm Pipe
100m 12mm Pipe
1no 3 Port Branch Manifold with Auto Air Vents & Flow Meters
1no Pump Mixing Pack with A'A' Rated Pump & Isolating Valves
4no Pipe Bends Floor to Manifold
4no 16mm Pipe Connectors
2no Blanking Plugs
3no 230V Actuator - 2 Wire
1no Timloeon Programmable Thermostat with Floor Sensor
1no Wiring Centre - 230V Actuator Output
4no 16mm to 12mm Sraight Reducer