Xella Ytong Lightweight Standard 3.6N 100mm Block

• 440 x 215 x 100mm Block Size
• 72no per pack
• 10no per m2

Ytong low energy block: a sustainable building block

Ytong low energy blocks have unrivalled insulating properties and are used to construct internal partition walls and load bearing external walls. The blocks can be laid in either general purpose mortar or thin layer mortar. Mortars for use with Ytong blocks should be as described in BS EN 998-2 Specifications for Mortar for Masonry. The dimensional accuracy of Ytong blocks make them also ideal for use with thin joint mortar. With Ytong low energy blocks, Xella sets the new standard for energy efficient, solid building; load bearing aerated concrete blocks with excellent thermal properties (till-lambda 0.07).

The Ytong low energy block is not only highly thermally efficient it is also highly sustainable. In all stages of its life cycle: during the extraction of base materials, during production, while being used and finally when recycled.

• The block consists of sand, lime and cement natural abundantly available raw materials that are obtained from responsibly managed extraction sites.
• The production process creates very little CO2 emissions. Most energy is consumed in curing the product by means of steam, and even then technology keeps energy consumption to an absolute minimum.
• Once manufactured, the lightweight blocks can be transported and used efficiently.
• The blocks retain their properties during the entire lifespan of a building: they never lose their energy efficiency or structural values.
• When a building is demolished the blocks can be used again for the manufacture of new aerated concrete.